Monitor problem

So I have a problem with my monitor that I simply cant fix, I tried everything so I need help.
I turn on my computer and everything seems fine, except my monitor doesnt do anything, when I turn my monitor off and on again it says "no signal please check your connection", and then it enters sleep mode again.
I tried two monitors, and two monitor cables but nothing changed, first I had a hdmi to vga adapter but I broke it by accident, im not sure if its 100% broken though, after that I went and bought a dvi to vga adapter and thats when I couldnt get my monitor to display anything.
What I tried so far is unplugging gpu power cables and plugged the monitor in the motherboard, I tried unplugging the psu and holding the power button for 1 minute but nothing changed.

 

Did you try

Spoiler

Supergluing it to the port

 

my pc wont turn on now whats going on

 

Try to connect another pc to your monitor.

 

I dont have a 2nd pc or laptop unfortunately

 

Either get one of your friends to bring their laptop or something. Because you need to find out if it is the pc which is not working or the monitor

--- Double Post Merged, Mar 15, 2018, Original Post Date: Mar 15, 2018 ---

Do you have pc or laptop?

 

I have a pc, I wont be able to find a 2nd pc for like a week its a bad situation, but I am 99% certain its the computer because I tried 2 different monitors, one that I was using and then the incident I mentioned above happened and I also tried a completely brand new monitor

 

Okay, your pc usually has two types of input. One from the motherboard and another from the graphics card.

 

as I said I tried both to check if the gpu has any problems but both dont work

 

Then idk. its prob ur pc.

 

Remove your gpu and use motherboard ports. Try and tell what happened

 

doesnt work still

 

What kind of motherboard do you have?

 

gigabyte ab350 gaming, the build is not new it was working so far so idk what hppened

 

Clear CMOS if you haven't already

Also what happens on start? You sure your hdd/ssd starts up? Any beeps or led flashes?

 

I removed the motherboars battery and put it back after 10 minutes but no bueno, 0 beeps or flashes, from what I can tell the system boots up normally and it propably even reaches the desktop because the leds in the pc turn to their configured color which happens after u boot normally

 

Alllrighty... Remove RAM, try booting with one stick only and try different slots starting from the preferred.

Also worth a try

 

should I just buy a hdmi cable instead